Shandong Qingneng Power Co., Ltd.

Steam Turbines manufacturers / suppliers, offering Steam Turbines, Generators, Turnkey Project, Steam Turbine Care, Turbomachinery, Steam Plant Services and so on.

About Us

  • 1
  • 2
  • 3
  • 4
Shandong Qingneng Power Co., Ltd.Shandong Qingneng Power Co., Ltd.Shandong Qingneng Power Co., Ltd.Shandong Qingneng Power Co., Ltd.
Shandong Qingneng Power Co., Ltd.
Address: No.3011 Haidai North Road,Qingzhou City, Shandong Province, China, Weifang, Shandong, China
Member Since: 2018
Main Markets: Asia , East Europe , Middle East , Other Markets , West Europe

Contact Us

Mobile:
Tel:
Wechat: 15624145254

Ms. Sarah

Contact Us
Recommended Products
New Products
QNP Turbo Generator Bhel

Certificate: ISO9001,CE

Product Description: QNP Turbo Generator Bhel: A steam turbine generator is a device that uses steam to rotate a turbine generator to produce electricity.Steam turbines use water that is heated to extremely high temperatures and converted into steam to rotate the blades of a turbine, in order to create mechanical or rotational energy.   This rotational energy caused by the high pressured steam turbine is used to generate electricity in an attached generator. Steam turbine generators require an outside fuel source to heat water into the steam needed for electric production. QNP`s steam turbine generator can adopt static silicon controlled excitation, two-pole AC brushless excitation and three-pole AC brushless excitation. Characteristic and Performance of Generator main parts Stator: Stator consists of base, stator core and stator windings. The base is welded by steel plate, the structure is light and sturdy, and the base is divided into many air inlet and outlet zones in the axial direction; Stator coil: It is stacked by strands of copper wire covered by polyester glass fiber, with half-unit type and basket shaped structure (parts of stator coils use transposition structure). The insulation grade of the stator coil is F grade. The stator coil is shaped by continuous wrapping and mould pressing with mica tapes. The coil end is firmly tied up to the support and the bundling ring with unidirectional tapes or dacron-glass ropes thus the turbo-generator unit became highly resistant towards sudden short-circuit conditions.      Stator core: Stator core is punched and stacked by cold rolled non-oriented, high permeability, low loss high-quality silicon steel sheet, both sides of the silicon steel sheet are coated with a solid insulating film to prevent short-circuit between the stator core pieces to reduce eddy current loss. Rotor: The rotor is composed of shaft, coil, center ring, shroud ring and fan ring etc. The rotor coil is made of cold-drawn flat copper wires, and processed by oxygen-free annealing. The rotor coil of generator with 50MW and above is welded together by silver-bearing cold-drawn copper wires and adopts F grade insulation.  The shroud ring at rotor coil end is made of non-magnetic steel. Both ends of the rotor are equipped with centrifugal fan or axial flow fan with paddle fan blade which is forged by high-strength aluminum alloy. Rotor machining: The generator shaft is forged from an integral high-quality alloy steel and has an axial groove formed thereon for fitting a rotor coil and an air groove or a crescent groove is made in the large tooth to enhance the cooling of the main body and the coil end. The slots are processed by special machine for generator rotor processing, Tacchi high precision horizontal slotting and milling machine made in Italy, to ensure the high efficiency of generator.  The generator rotor must be subjected to high-speed dynamic balancing experiment and dynamic impedance experiment before delivery to verify the mechanical strength of the rotor and ensure excellent inter-turn insulation of the rotor windings. Models Mainly produce the following models of steam turbine generator and the specifications are as follows: Model  Voltage (KV)  Frequency (Hz)  Power (MW) 2 Poles Steam Turbine Generator 6.3-3.8 50 3-60 6.6-13.8 60 4 Poles Steam Turbine Generator 0.4/0.69 6.3/6.6 10.5/11 50  0.5-30 0.4-11 60 Company Overview: Located in the Qingzhou city of Shandong province, QNP(QingNeng Power)has developed into the largest leading private manufacturer of steam turbines and generators in China, covering an area of 200,000 square meters with building area of 90,000 square meters. We have subsidiaries in Indonesia and Beijing, as well as a branch office in Shanghai.  QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. Our Product & Service: QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products. Manufacturing steam turbine, generator (≤100MW)with I&Cl system, electrical panels & switchgears, spare parts and etc. Providing 1~1000MW Overhaul & Commissioning, Energy Saving Reform and Upgrading, Operation Supervision Service for Power Plant and so on. Contracting Power Plant Turn-key Project. QNP manufactures various steam turbines. At present, we mainly focus on the research and promotion of single layout and packaged steam turbines, as well as High speed & high efficiency steam turbines. Manufacturing and Capacities: With strong manufacturing and machining capacities, main parts and key components of our products are made by CNC machines. More than 400 types of advanced equipment with high accuracy, strong reliability and advanced machining processes are available with QNP, such as the Mitsubishi Planer five sides machining center, the Italy horizontal slotting machine, the 10 meters CNC heavy duty horizontal lathe, the 8 meters vertical lathe, the 6 meters CNC grinding machine, the CNC gantry milling and drilling machine, the CNC gantry wrapping machine and the winding machine for generators. The components are standardized and modularized with enhanced universality and compatibility. Our state of the art quality test center consists of a physics lab, a chemistry lab, a chemical analysis lab, a precision measurements lab and a metrology lab. The high speed dynamic balancing test machine can test rotors at speeds up to 15000 rpm. The Steam Turbine trial platform can do load tests and performance verification tests. Other instruments such as our German direct-reading spectrometer, tri-linear coordinate measuring instrument, and our speed test platform provide reliable assurance of product quality. Project Cooperate With Us: QNP, in cooperation with the Chinese Academy of Sciences (CAS) has adapted it's evaporative cooling technology for cooling of distributed energy Generators, which has reduced the size of Generators significantly. In collaboration with Sea Water Desalination Institute of State Oceanic Administration, QNP has formed a technical team to carry out research on the key technologies of power generation and sea water desalination. The rapid development of QNP has captured the attention of the Fortune Global 500 companies, such as the MAN Group from Germany, and Mitsubishi Heavy Industries from Japan. These companies and numerous others have worked with QNP for technical exchanges. QNP has also gotten strong support from central and local government. Top government officials at all levels have visited QNP many times and given high ratings on QNP`s development. Sales  Network & After Sales: The market share of QNP is growing steadily and rapidly. Our agents and products have a presence in many countries and regions all over the world such as the U.S.A, Canada, Brazil, Argentina, Russia, Australia, Serbia, India, Indonesia, Pakistan, the Philippines, Thailand, Cambodia, Vietnam, Iran, Myanmar, as well as Sudan, Morocco and Algeria in Africa. QNP has a skilled and experienced After Sales team geared up for fast response and superior services to our customers at any time. Our Long distance monitoring center is equipped to monitor, diagnose, serve and manage the units delivered. QNP also provides technical training to our customers at regular intervals.

Small Steam Power Generator

Certificate: ISO9001,CE

Product Description: Power Plant Turbine Generator from QNP: A steam turbine generator is a device that uses steam to rotate a turbine generator to produce electricity.Steam turbines use water that is heated to extremely high temperatures and converted into steam to rotate the blades of a turbine, in order to create mechanical or rotational energy.   This rotational energy caused by the high pressured steam turbine is used to generate electricity in an attached generator. Steam turbine generators require an outside fuel source to heat water into the steam needed for electric production. QNP`s steam turbine generator can adopt static silicon controlled excitation, two-pole AC brushless excitation and three-pole AC brushless excitation. Characteristic and Performance of Generator main parts Stator: Stator consists of base, stator core and stator windings. The base is welded by steel plate, the structure is light and sturdy, and the base is divided into many air inlet and outlet zones in the axial direction; Stator coil: It is stacked by strands of copper wire covered by polyester glass fiber, with half-unit type and basket shaped structure (parts of stator coils use transposition structure). The insulation grade of the stator coil is F grade. The stator coil is shaped by continuous wrapping and mould pressing with mica tapes. The coil end is firmly tied up to the support and the bundling ring with unidirectional tapes or dacron-glass ropes thus the turbo-generator unit became highly resistant towards sudden short-circuit conditions.      Stator core: Stator core is punched and stacked by cold rolled non-oriented, high permeability, low loss high-quality silicon steel sheet, both sides of the silicon steel sheet are coated with a solid insulating film to prevent short-circuit between the stator core pieces to reduce eddy current loss. Rotor: The rotor is composed of shaft, coil, center ring, shroud ring and fan ring etc. The rotor coil is made of cold-drawn flat copper wires, and processed by oxygen-free annealing. The rotor coil of generator with 50MW and above is welded together by silver-bearing cold-drawn copper wires and adopts F grade insulation.  The shroud ring at rotor coil end is made of non-magnetic steel. Both ends of the rotor are equipped with centrifugal fan or axial flow fan with paddle fan blade which is forged by high-strength aluminum alloy. Rotor machining: The generator shaft is forged from an integral high-quality alloy steel and has an axial groove formed thereon for fitting a rotor coil and an air groove or a crescent groove is made in the large tooth to enhance the cooling of the main body and the coil end. The slots are processed by special machine for generator rotor processing, Tacchi high precision horizontal slotting and milling machine made in Italy, to ensure the high efficiency of generator.  The generator rotor must be subjected to high-speed dynamic balancing experiment and dynamic impedance experiment before delivery to verify the mechanical strength of the rotor and ensure excellent inter-turn insulation of the rotor windings. Models Mainly produce the following models of steam turbine generator and the specifications are as follows: Model  Voltage (KV)  Frequency (Hz)  Power (MW) 2 Poles Steam Turbine Generator 6.3-3.8 50 3-60 6.6-13.8 60 4 Poles Steam Turbine Generator 0.4/0.69 6.3/6.6 10.5/11 50  0.5-30 0.4-11 60 Company Overview: Located in the Qingzhou city of Shandong province, QNP(QingNeng Power)has developed into the largest leading private manufacturer of steam turbines and generators in China, covering an area of 200,000 square meters with building area of 90,000 square meters. We have subsidiaries in Indonesia and Beijing, as well as a branch office in Shanghai.  QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. Our Product & Service: QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products. Manufacturing steam turbine, generator (≤100MW)with I&Cl system, electrical panels & switchgears, spare parts and etc. Providing 1~1000MW Overhaul & Commissioning, Energy Saving Reform and Upgrading, Operation Supervision Service for Power Plant and so on. Contracting Power Plant Turn-key Project. QNP manufactures various steam turbines. At present, we mainly focus on the research and promotion of single layout and packaged steam turbines, as well as High speed & high efficiency steam turbines. Manufacturing and Capacities: With strong manufacturing and machining capacities, main parts and key components of our products are made by CNC machines. More than 400 types of advanced equipment with high accuracy, strong reliability and advanced machining processes are available with QNP, such as the Mitsubishi Planer five sides machining center, the Italy horizontal slotting machine, the 10 meters CNC heavy duty horizontal lathe, the 8 meters vertical lathe, the 6 meters CNC grinding machine, the CNC gantry milling and drilling machine, the CNC gantry wrapping machine and the winding machine for generators. The components are standardized and modularized with enhanced universality and compatibility. Our state of the art quality test center consists of a physics lab, a chemistry lab, a chemical analysis lab, a precision measurements lab and a metrology lab. The high speed dynamic balancing test machine can test rotors at speeds up to 15000 rpm. The Steam Turbine trial platform can do load tests and performance verification tests. Other instruments such as our German direct-reading spectrometer, tri-linear coordinate measuring instrument, and our speed test platform provide reliable assurance of product quality. Project Cooperate With Us: QNP, in cooperation with the Chinese Academy of Sciences (CAS) has adapted it's evaporative cooling technology for cooling of distributed energy Generators, which has reduced the size of Generators significantly. In collaboration with Sea Water Desalination Institute of State Oceanic Administration, QNP has formed a technical team to carry out research on the key technologies of power generation and sea water desalination. The rapid development of QNP has captured the attention of the Fortune Global 500 companies, such as the MAN Group from Germany, and Mitsubishi Heavy Industries from Japan. These companies and numerous others have worked with QNP for technical exchanges. QNP has also gotten strong support from central and local government. Top government officials at all levels have visited QNP many times and given high ratings on QNP`s development. Sales  Network & After Sales: The market share of QNP is growing steadily and rapidly. Our agents and products have a presence in many countries and regions all over the world such as the U.S.A, Canada, Brazil, Argentina, Russia, Australia, Serbia, India, Indonesia, Pakistan, the Philippines, Thailand, Cambodia, Vietnam, Iran, Myanmar, as well as Sudan, Morocco and Algeria in Africa. QNP has a skilled and experienced After Sales team geared up for fast response and superior services to our customers at any time. Our Long distance monitoring center is equipped to monitor, diagnose, serve and manage the units delivered. QNP also provides technical training to our customers at regular intervals.

Turbine in Thermal Power Plant QNP

Certificate: ISO9001,CE

Product Description: Turbine in Thermal Power Plant The QNP steam turbines` capacity mainly covers 200MW and below, QNP provides a wide range of products, include all types of steam turbines (condensing steam turbine, back pressure steam turbine, extraction condensing steam turbine, extraction back pressure steam turbine,Injection condensing steam turbine, reheat steam turbine). We focus on the promotion of the single-tier and fast-installation steam turbine, three platform and one station steam turbine, high-speed and high-efficiency steam turbine, as well as matched generators and electric control equipment. Characteristics of QNP Turbine in Thermal Power Plant: High speed, high efficiency, low energy consumption. Highly integrated three platform and one station, require smaller space. In-the-factory assembly and whole machine transportation make site installation easier, faster and more economical. Single-tier and direct exhaust, condenser floor installation, lower construction cost. Turbine in Thermal Power Plant characteristics: Maximum inlet steam pressure: 14Mpa Maximum inlet steam temperature: 535℃ Maximum capacity: 100MW Exhaust steam can be used for heating purpose. also can be used for power generating or driving other equipment. Customized order acceptd. We also offer Remote monitoring and diagnose service Company Overview: Located in the Qingzhou city of Shandong province, QNP(QingNeng Power)has developed into the largest leading private manufacturer of steam turbines and generators in China, covering an area of 200,000 square meters with building area of 90,000 square meters. We have subsidiaries in Indonesia and Beijing, as well as a branch office in Shanghai.  QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. Our Product & Service: QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products. Manufacturing steam turbine, generator (≤100MW)with I&Cl system, electrical panels & switchgears, spare parts and etc. Providing 1~1000MW Overhaul & Commissioning, Energy Saving Reform and Upgrading, Operation Supervision Service for Power Plant and so on. Contracting Power Plant Turn-key Project. QNP manufactures various steam turbines. At present, we mainly focus on the research and promotion of single layout and packaged steam turbines, as well as High speed & high efficiency steam turbines. Manufacturing and Capacities: With strong manufacturing and machining capacities, main parts and key components of our products are made by CNC machines. More than 400 types of advanced equipment with high accuracy, strong reliability and advanced machining processes are available with QNP, such as the Mitsubishi Planer five sides machining center, the Italy horizontal slotting machine, the 10 meters CNC heavy duty horizontal lathe, the 8 meters vertical lathe, the 6 meters CNC grinding machine, the CNC gantry milling and drilling machine, the CNC gantry wrapping machine and the winding machine for generators. The components are standardized and modularized with enhanced universality and compatibility. Our state of the art quality test center consists of a physics lab, a chemistry lab, a chemical analysis lab, a precision measurements lab and a metrology lab. The high speed dynamic balancing test machine can test rotors at speeds up to 15000 rpm. The Steam Turbine trial platform can do load tests and performance verification tests. Other instruments such as our German direct-reading spectrometer, tri-linear coordinate measuring instrument, and our speed test platform provide reliable assurance of product quality. Project Cooperate With Us: QNP, in cooperation with the Chinese Academy of Sciences (CAS) has adapted it's evaporative cooling technology for cooling of distributed energy Generators, which has reduced the size of Generators significantly. In collaboration with Sea Water Desalination Institute of State Oceanic Administration, QNP has formed a technical team to carry out research on the key technologies of power generation and sea water desalination. QNP has set up a training mechanism for senior managers with Tsing Hua University and Peking University, as well as technical trainings with Xi`an Jiaotong University, the Huazhong University of Science and Technology, and Shandong University in multiple fields. The rapid development of QNP has captured the attention of the Fortune Global 500 companies, such as the M AN Group from Germany, and Mitsubishi Heavy Industries from Japan. These companies and numerous others have worked with QNP for technical exchanges. QNP has also gotten strong support from central and local government. Top government officials at all levels have visited QNP many times and given high ratings on QNP`s development. Sales  Network & After Sales: The market share of QNP is growing steadily and rapidly. Our agents and products have a presence in many countries and regions all over the world such as the U.S.A, Canada, Brazil, Argentina, Russia, Australia, Serbia, India, Indonesia, Pakistan, the Philippines, Thailand, Cambodia, Vietnam, Iran, Myanmar, as well as Sudan, Morocco and Algeria in Africa. QNP has a skilled and experienced After Sales team geared up for fast response and superior services to our customers at any time. Our Long distance monitoring center is equipped to monitor, diagnose, serve and manage the units delivered. QNP also provides technical training to our customers at regular intervals. QNP regards continuous learning ability as one of the company`s core competitiveness and provides regular training to employees to enhance their comprehensive abilities and skills. The structure of our management is the basic solution for our development. The Basic Law of QNP and other related regulations have been established to change the management style from [rule of man" to [rule of law". This has laid a solid foundation for further development of QNP. Reviving national industry is our task. Becoming a first-class power equipment manufacturer of the Global economy and energy conservation is our objective.

Back Pressure Steam Turbine Generator

Certificate: ISO9001,CE

Product Description: Back Pressure Steam Turbine Generator The QNP steam turbines` capacity mainly covers 200MW and below, QNP provides a wide range of products, include all types of steam turbines (condensing steam turbine, back pressure steam turbine, extraction condensing steam turbine, extraction back pressure steam turbine,Injection condensing steam turbine, reheat steam turbine). We focus on the promotion of the single-tier and fast-installation steam turbine, three platform and one station steam turbine, high-speed and high-efficiency steam turbine, as well as matched generators and electric control equipment. Characteristics of QNP Turbine: High speed, high efficiency, low energy consumption. Highly integrated three platform and one station, require smaller space. In-the-factory assembly and whole machine transportation make site installation easier, faster and more economical. Single-tier and direct exhaust, condenser floor installation, lower construction cost. Back Pressure Steam Turbine Product characteristics: Maximum inlet steam pressure: 14Mpa Maximum inlet steam temperature: 535℃ Maximum capacity: 100MW Exhaust steam can be used for heating purpose. also can be used for power generating or driving other equipment. Customized order acceptd. We also offer Remote monitoring and diagnose service QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as  Recorded National Hihg-tech Enterprises Enterprise Technology Center of Shandong Province Shandong HighEfficiency & High Speed  Steam Turbine Project Technology Research Center Measurement Guarantee Confirmation Qualified Enterprise  In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

20MW steam turbine generator

Certificate: ISO9001

Product Description: 20MW steam turbine generator QNP are leading professional manufacture for industrial Turbomachinery which are reliable, high quality and high market share in China. QNP generators are the perfect solution wherever power has to be generated quickly, reliably and efficiently – whether on an oil platform, in an industrial plant , steam power plant or for renewables. QNP`s steam turbine generator can adopt static silicon controlled excitation, two-pole AC brushless excitation and three-pole AC brushless excitation. Models:   Voltage(KV) Frequency(Hz) Power(MW) 2 poles steam turbine generator 6.3-3.8 50 3-60 6.6-13.8 60 4 poles steam turbine generator 0.4/0.69 6.3/6.6 10.5/11 50 0.5-30 0.4-11 60 QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

3MW High-Speed Steam Turbine

Certificate: ISO9001,CE

Product Description: 3MW High-Speed Steam Turbine The QNP steam turbines` capacity mainly covers 200MW and below, include NI series (Normal Impulse Turbines) and HE series (High Efficiency Turbines). Our steam turbines are flexible and diverse in structure and layout so as to meet various requirement of our users. Aiming at the global leading equipment manufacturing enterprise, our design and R&D standards are higher than GB standard and in the same league with European and American energy equipment manufacturers. Characteristics of QNP Turbine: High speed, high efficiency, low energy consumption. Highly integrated three platform and one station, require smaller space. In-the-factory assembly and whole machine transportation make site installation easier, faster and more economical. Single-tier and direct exhaust, condenser floor installation, lower construction cost. Technical performance and economic benefits analysis: Changzhou- Combined cycle waste heat power generation back pressure steam turbine Steam parameters: Rated inlet pressure:4.9 Mpa Rated inlet temperature:430℃ Rated inlet steam flow:43t/h Rated exhaust steam pressure: 0.98Mpa Steam turbine series Model Rated power Rated speed Internal efficiency Steam consumption HE series B3.55-4.9/0.98 3.55MW 10000rpm 81.46% 11.72kg/kw.h NI series B2.88-4.9/0.98 2.88MW 3000rpm 62.39% 14.93 kg/kw.h With the same fresh steam parameters, the HE Series was 19.07% more efficient than the NI Series with significantly lowered steam consumption and more power generation at 0.67 MW per hour. Given that the sales price to power network is 0.4 Yuan, the average annual operating time is 8000 hours, the annual extra economic benefits can be as much as: 0.67MW / h × 8000 hours × 0.4 Yuan / kw × 1000 = 2144000 Yuan (2.144 million Yuan). HE series high-speed model, with such characteristics as compact structure, easy installation, smaller size and less space occupancy, can considerably lower our customers` installation and civil engineering costs. QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

20MW Power Plant  LSTK

Certificate: ISO9001

Product Description: Power Plant  LSTK QNP has its own electric power design institute,generator branch factory and erection team which can offer whole solution for customers. QNP can supply LSTK to ensure clients' projects operate smoothly.LSTK project covers project design,procurement,construction,installation and commissioning services. QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products. QNP provides all-in-one project solutions for customers, covering design, engineering, procurement, installation and equipment debugging, which has greatly shortened the project circle and reduced the project cost for our customers.

Garbage Power steam turbines

Product Description: Garbage Power As a product of human activity, garbage is spread throughout every corner of the world and is categorized into various wastes of different natures. Conventional methods for the disposal of garbage usually cause environmental pollution and greatly endanger human survival. Through the construction of waste incineration power plants, the amount of waste can be greatly reduced, and high temperature and high pressure steam thereby produced can drive steam turbines and can be used to generate electricity, hand hence bring inexhaustible clean energy to people. By providing high-efficiency turbine power generation equipment, QNP has delivered clean energy to millions of households and contributed to the world's environmental protection undertakings. QNP is the largest and leading private manufacturer of steam turbines and generators in China.  Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares,  with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs,  experts and senior engineers,  an excellent management team with extensive knowledge and experience,  a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator,  and a reliable,  experienced after-sale service team,  who provide rapid-response to our customers` appeal.  Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

1MW-50MW High Efficiency Turbines

Certificate: ISO9001

Product Description: 1MW-50MW High Efficiency Turbines In the face of oversea customers, our service department has a quick response to supply the better and faster international service for the customers all over the world. QNP is deeply involved in the development and innovation of energy industry and focuses on R & D and cooperation in cutting-edge technology of turbine machinery. Technical features: QNP adopts advanced small pitch-circle technology in its high-end high efficiency turbine products, and hence considerably improved the turbines`flow efficiency. Using 3D bending-torsion blade design to improve the final and penultimate stage efficiency and structural strength to ensure long-time continuous operation of the unit. Using high-speed running design and full-cycle steam distribution to improve the unit`s flow efficiency, reduce space occupancy, and make the installation more efficient. High-precision and high-quality manufacturing process: to ensure the high precision and high quality of key dynamic and static components, the flow passage components are processed by four-axis or five-axis CNC machining center. Specially produced for high-end users, each component is carefully designed and the unit always presented to the customer as a flawless modern industrial artwork. Maximum internal efficiency may reach 88%. QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

10MW High Speed Back Pressure Steam Turbine

Certificate: ISO9001,CE

Product Description: 10MW Back Pressure Steam Turbine Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants,these turbines can either be used for drive application (Sugar mill drives, Sugar fibrizor / Shredder drive, Pump drives and so on) or power generation application in which case the turbine drives the generator.Our QNP series of turbines for industrial applications covers a power range from 1 to over 100 MW. Back pressure steam turbine characteristics: Maximum inlet steam pressure: 14Mpa; Maximum inlet steam temperature: 535℃; Maximum capacity: 100MW; Exhaust steam can be used for heating purpose; Can be used for power generating or driving other equipment; Customized order; Remote monitoring and diagnose service. QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

C10.5-4.9/0.98 Condensing steam turbine

Certificate: ISO9001

Product Description: C10.5-4.9/0.98 Condensing steam turbine The QNP steam turbines` capacity mainly covers 200MW and below, include NI series (Normal Impulse Turbines) and HE series (High Efficiency Turbines). Our steam turbines are flexible and diverse in structure and layout so as to meet various requirement of our users. Aiming at the global leading equipment manufacturing enterprise, our design and R&D standards are higher than GB standard and in the same league with European and American energy equipment manufacturers. Condensing steam turbine  characteristics: Maximum inlet steam pressure: 14Mpa; Maximum inlet steam temperature: 535℃; Maximum capacity: 200MW; With a non-controlled(bleed) extraction steam outlet to meet small amount of steam demand; Injection steam inlet can be added to fully utilize low quality steam (including saturated steam); Exhaust steam can be cooling by water-cooling or air-cooling system; Can be used for power generating or driving other equipment; Customized order; Remote monitoring and diagnose service; QNP is the largest and leading private manufacturer of steam turbines and generators in China. Located in Qingzhou city, one of the nine ancient prefectures of China, QNP was founded in 1993 and covers an area of 20 hectares, with total construction area of 90,000 square meters. QNP has a first-class dedicated R&D team comprised of PhDs, experts and senior engineers, an excellent management team with extensive knowledge and experience, a highly skilled super-electromechanical engineering team that utilizes scientific theory to create outstanding steam turbine and generator, and a reliable, experienced after-sale service team, who provide rapid-response to our customers` appeal. Our advanced office automation system provides excellent information management down to the most meticulous details. QNP has been awarded with many honors, such as [Recorded National Hihg-tech Enterprises", [Enterprise Technology Center of Shandong Province", [Shandong High-Efficiency & High Speed  Steam Turbine Project Technology Research Center", and [Measurement Guarantee Confirmation Qualified Enterprise". In addition, QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001. QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

Generators
Impulse Steam Turbine
Power Plant EPC Project
Steam Tubine-HE Series

News

Steam turbine generator unit testing of Malaysia

more

Send Inquiry

Your message must be between 20-3000 characters